AVer FX3000R - Manual (Page 44)

40
Application > ePTZ
Both admin and operator levels can customize the ePTZ setting. In this section, you can set the patrol
target area, patrol sequence and dwelling time.
To Setup the ePTZ
1. Click Application > ePTZ.
2. Use the direction buttons and zoom button to locate the patrol target area. Press to view the
full image and reset the zoom level.
3. Type a name for the patrol shooting area e.g. type “UpperLeft” in the Name text box and press Add
button. The preset target area will be listed in the User Preset Locations. Click to delete the
preset target area and to show the preset target area. Repeat step 2 and 3 to add more preset
locations.