AVer FX3000R - Manual (Page 15)

11
ENGLISH
System > Network
In this section, only admin level is authorized to configure the Network settings.
System > Network > Setting
In Setting page, you can configure the type of network connection for IP camera and assign name for
the IP camera. Depending on the network connection, IP camera can be accessed from the computer
within the same local area network (LAN) or anywhere with Internet connection. After completing the
setting, click Save to apply the new setting and Cancel to keep the old setting.
Name Function
(1) Device Name Assign name for the IP camera.
(2) Network HW Switch Enable/disable to use the IP camera DIP switch network setting. If
this is enabled, make sure the DIP switch behind the IP camera is set
properly.
* ( Available for FX series and SF2121H-R Box type only )