AVer SF1311H-B - Manual (Page 9)

5
restored to factory default settings and reboot again.
[Note] Restoring the factory default setting will lose the all previous settings included IP address
forever. User needs to run the IPWizard II program to search the device and configure it
to let the device work properly again.
Hardware Installation
1. Fix IR camera to desired location with wall mount fixture
2. Connect a CAT 5 cable to the LAN socket located on the IP Camera ‟s back panel and attach
it to the network.
3. Connect RS485 D+ and D- (if you need to control PT scanner)
4. Connect the attached power adaptors to camera and heater (optional) and plug-in these
adaptors into power outlet