AVer SF1311H-B - Manual (Page 10)

6
Preparation
Search and Set up by IPWizard II
When you installed the Camera on a LAN environment, you have two easy ways to search your
Cameras by IPWizard II or UPnP™ discovery. Here is the way to execute IPWizard II to discover
Camera‟s IP address and set up related parameter in a Camera.
Search
When launch the IPWizard II, a searching window will pop up. IPWizard II is starting to search
Network Cameras on the LAN. The existed devices will be listed as below.
[Note] The factory default IP address is 192.168.10.30