AVer SF1311H-B - Manual (Page 43)

39
E-Mail: Setup E-Mail Configuration
You may setup SMTP mail parameters for further operation of Event Schedule. That‟s, if users
want to send the alarm message out, it will need to configure parameters here and also add at
least one event schedule to enable event triggering.
 SMTP Server: Enter SMTP server name or the IP address of the SMTP server.
 Test: Send a test mail to mail server to check the account that user has entered is available.
 SMTP Port: Set port number of SMTP service.
 SMTP Authentication: Select the authentication required when you send an e-mail.

Disable: Send e-mail without authentication.

Enable: Send e-mail with authentication.
 Authentication User name: Enter the user name for the SMTP server if Authentication is
Enable.
 Authentication Password: Enter the password for the SMTP server if Authentication is
Enable.
 E-mail To: Enter the receiver‟s e-mail address.
 E-mail From: Enter the sender‟s E-mail address. This address is used for reply e-mails.
 E-mail Subject: Enter the subject/title of the e-mail.