AVer EH1116H-4 Nano quick guide - Manual (Page 9)

3
QUICK USER GUIDE
II. Hardware Installation
A. Install the hard disk
User can install 1 SATA hard disks inside the DVR unit.
Follow the illustrated instructions below to install the hard disk:
1. Loosen all screws(2 sides and rear side) 2. Push the cover backward and lift. The cover is
a little bit tight, please be carefully the hands.
3. Turn the cover over and place the SATA hard
disk (face down) inside the HDD holder.
4. Screw the hard disk(both side)
Place the hard disk face down and
connector interface of hard disk in
this direction.