AVer EH1116H-4 Nano quick guide - Manual (Page 15)

9
QUICK USER GUIDE
III. First Time Using the DVR Unit
1. Connect the mouse to DVR unit (through USB port).
2. Connect all necessary external devices.
i
DVR unit doesn ’t supply the power to connected external devices.
3. Plug the power to turn on the DVR unit.
4. Please wait for a while until start up process is completed. And then, the preview screen will show
up on surveillance screen.
EH1008H-4 Nano/Nano
+
Preview UI
5. Format hard disk: If the hard disk is first time installed in the DVR unit, please format the hard disk.
Following the below steps to format the hard disk.
i - Before formatting hard disk, please stop recording.
- While formatting hard disk, the CPU usage will be near to 100% and might slow down
the DVR system response.
a. Click Setup and enter the password (If this is the first time, enter the default password [admin].
The default ID will be admin).
b. Click System → Add