AVer EH1116H-4 Nano quick guide - Manual (Page 18)

12
f. In IP Camera Setting window, click Protocol radio button, then, select Protocol, Mode,
and Video Format. User also can click Auto Search button to find the IP cameras that
can be detected on your LAN network.
g. Enter IP address in IP Camera site column or enter the URL of IP camera.
h. Enable Authentication and enter ID and password if IP camera ’s access authority is
required.
i. Click OK to save the setting.
j. When the IP camera has connected, user should see the camera information of
Protocol, Model, Video Format, IP port, and Channel.
k. To connect another IP camera, follow the above steps.