AVer P5000 series - Manual (Page 14)

5
1.4 Hard Disk Installation
1.4.1 Install Hard Disk inside HDD Bay
The NVR/DVR unit can support up to 8 SATA hard disks to install inside HDD bay. Follow the
instructions below to install the hard disk:
1. Open the door of HDD bay. 2. Pull out the HDD bay.
3. Lose the screw on both side of HDD
and remove the plastic box from HDD
bay.
4. Place the hard disk inside the HDD bay
and align the hard disk
’s screw hole
with screw hole of HDD bay. And,
secure the hard disk (both side).