AVer CP155 user manual - Manual (Page 23)

OSD Menu Description
CAPTURE
SINGLE
CONTINUOUS
IMG SIZE
IMAGE > CAPTURE
Use ▲or▼ to select SINGLE or CONTINUOUS
capture mode and IMG SIZE to select the capture
pixel size of the image.
Select SINGLE to save one still image only and
CONTINUOUS to save successive still images until
the built-in memory is full or when the CAP/DEL
button is being press again to stop.
In Continuous mode, press ENTER the bar will turn
red, use ◄ & ► to increase and decrease the capture
time interval between frames and then press ENTER
to save the setting and the bar will turn white. The
time interval can be set from 5 to 600 sec.
CAPTURE
SINGLE
CONTINUOUS
IMG SIZE
5 SECS
INTERVAL
In IMG SIZE, press ENTER, use ▲ and ▼ to make a
selection, and press ENTER to save the setting.
CAPTURE
SINGLE
CONTINUOUS
IMG SIZE 1024 x 768
2016 x 1520
NIGHT VIEW
OFF
AUTO
IMAGE > NIGHT VIEW
Use ▲or▼ to turn Night View OFF or AUTO.
If you are presenting in a low-light condition, Night
View enables the image of the object to appear as
though under normal lighting conditions. CP155 can
automatically adjust the exposure to compensate for
the adverse condition, but the captured image will
appear to be in slow motion.
CONTRAST
255 0 128
SETTING > CONTRAST
Use ►or◄ to emphasize or reduce the difference
between light and dark conditions then press ENTER.
The contrast level can be adjustable up to 255.
BRIGHTNESS
63 0 32
SETTING > BRIGHTNESS
Use ►or◄ to increase or decrease the brightness
level and improve the visibility of the image then
press ENTER. The brightness level can be set up to
63.
FORMAT MEMORY
NO
YES
SETTING > FORMAT MEMORY
Use ▲or▼ to select NO to exit or YES to format and
delete all the images saved in the built-in memory
then press ENTER.
Please wait till the message “FORMAT” at the lower
right corner of the screen disappear to finish the
process.
20