Name function – AVer CP155 user manual User Manual
Page 17
14
Name
Function
(12) AUTO IMAGE
Automatically adjust and set the white balance and
exposure setting.
(13) FREEZE
Toggle to pause or resume the camera.
(14) REVERSE
Rotate the image by 180°in Camera mode only.
(15) TIMER
Set/start/pause/resume the timer in TIMER menu.
The timer will automatically count up after count down
reaches zero to show the elapsed time. The timer
continues to run even when you switch to different
modes.
In TIMER menu, select SET TIME to set the time
value, START to begin the countdown timer,
PAUSE/RESUME to temporarily halt or continue, and
STOP to end.
To set the timer value, select SET TIME, press
ENTER and the bar will turn red, use ◄ & ► to
increase and decrease the value, and then press
ENTER to save the setting and the bar will turn white.
TIMER
START
PAUSE
STOP
SET TIME
120
0
0
Once the countdown timer starts, in the status box at
the lower right corner of the screen, the timer format
is displayed in hours : minutes : seconds.
(16) SPLIT SCRN
Divide the screen into two parts. One side displays
the live image from the CP155 camera and the other
side displays the captured images from the memory
in 8-thumbnail images.
Use the ▲,▼,◄, &► to make a selection and
ENTER to enlarge the selected image in split screen
mode. To horizontally or vertically pan the enlarged
image, use the ◄ & ► or ▲&▼ respectively.
To switch to different split screen type or close, press
SPLIT SCRN button repeatedly. You may also press
CAMERA/PC to exit Split Screen mode and switch to
Camera mode.