AVer CP155 user manual - Manual (Page 15)

Name Function
(5) CAMERA/PC Switch between Camera and PC mode.
- Camera mode displays the video signal from the
built-in camera.
- PC mode displays the video signal from the RGB
INPUT port of CP155.
(6) AUTO FOCUS Adjust the focus automatically.
(7) CAP/DEL - Capture a still image in Camera mode. The
captured image is saved in the memory and can
store up to 80 images. The image size can be saved
either in 1024 x 768 (default) or 2016 x 1520 pixels.
If the Capture setting is in Continuous mode, use
CAP/DEL button to start and stop successive still
image capture. To stop continuous capture, press
CAP/DEL button when “SAVE” message in the
status box at the lower right corner of the screen
disappear.
To set the image size of your choice, press MENU,
select CAPTURE in IMAGE menu list, press
ENTER, select IMG SIZE, press ENTER, use ▲
and ▼ to make a selection, and press ENTER to
save the setting.
- Remove the selected picture from the built-in
memory permanently in Playback mode.
(8) EFFECT Convert and display the image in BW, Negative or
Color in Camera and Playback mode only.
(9) PIP Show a thumbnail size playback screen at the corner
of the screen to view the captured image from the
memory in Camera mode.
Use ◄ or ► to move to the previous or next image
and ENTER to view the image in full screen and
press ENTER again to go back to PIP mode.
To move the thumbnail playback screen to different
corners or close, press PIP button repeatedly. You
may also press CAMERA/PC to exit PIP mode and
switch to Camera mode.
(10) PRESENTER Select to turn on/off AVERBOX or AVERVISOR. Only
one feature can be used at a time.
In the PRESENTER menu, use ▲ and ▼ to select
between AVERBOX or AVERVISOR, and press
ENTER to turn on/off the selected feature. Then
press MENU to close menu or execute the turned on
feature. To exit AVerBox or AVerVisor mode, press
CAMERA/PC to switch to Camera mode.
PRESENTER
AVERBOX OFF
AVERVISOR OFF
SHADE
COLOR
RESIZE
12