LG F1492QD1 - Manual (Page 67)

nstallation
Install or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Property ground washer to conform with aii governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is instailed on a
carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other vermin,
pay particuiar attention to keeping the appiiance and its surroundings in clean condition at aii times.
Any damage which may be cause by cockroaches or other vermin wili not be covered by the appliance
guarantee.
Transit bolts
The appliance is fitted with transit bolts to prevent internal damage during transport.
• Packing and all transit bolts must be removed
before using the washer.
" V When unpacking the base, be sure to remove
the additional packing support in the middle
of the base packing.
Washt
Base Packing
I
Removing transit bolts
1. To prevent internal damage during
transport, the special 4 bolts are
locked. Before operating the washer,
remove
the bolts along with the rubber bungs.
3 .
Take out the 4 bolts along with the
rubber bungs by slightly twisting the
bung. Keep the 4 bolts and the
spanner for future use.
' If they are not removed, it may cause
heavy vibration, noise and malfunction.
' Whenever the appliance is transported,
the transit bolts must be refitted.
2. Unscrew the 4 bolts with
the spanner supplied.
4 .
Close the holes with the
caps supplied.