Checking of batteries – Canon 518 Single -8 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

After the batteries have been loaded, check the

power level of the batteries. Press the battery

test buttons at the bottom of the camera, and

check the position of the needle seen in the

battery tester window.

For checking the mercury batteries, press the

white button. If the needle is in the blue zone

the batteries have sufficient power level. Other

wise, the mercury batteries must be replaced.

Checking of Batteries

Turn the knob
alter closing the cover.