Charging the battery, Remove the cover. insert the battery, Charge the battery – Canon IXUS 100 IS User Manual
Page 8: Remove the battery
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Charging the Battery
Use the included charger to charge the battery.
0
Remove the cover.
Insert the battery.
S Align the A marks on the battery and
charger, then Insert the battery by sliding It
in © and down @.
Charge the battery.
For CB-2LV: Flip out the plug ® and plug
the charger Into a power outlet @.
3 For CB-2LVE: Plug the power cord into
the charger, then plug the other end Into a
power outlet.
3 The charge lamp lights red and charging
starts.
The charge lamp will light green when
charging has finished. Charging takes
approx. 1 hour and 30 minutes.
Remove the battery.
Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in ® and up @.
To protect the battery and prolong Its life, do not charge It for longer than
24 hours continuously.