Canon T2000 User Manual

Page 36

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

3. Insert the film leader

into the threading slot (7)

below the white guide

roller and turn master
switch (10) to its threading
position. The leader

should be pushed into the
slot some 4 inches or

10 cm deep, until it is

positively gripped by the

drive mechanism and

automatically threaded
through the film path.

Keep the master, switch on

threading

until the leader

emerges in the take-up
reel and is tightly wound

around it. The entire

threading operation from
reel to reel is automatic,
except for insertion of the
leader.