3pull film to red mark – Canon QL19 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
Open the back cover.
Pull the back cover lock and the back
will rise Next, open the back cover to
maximum. When the back cover is opened,
the QL cover also opens simultaneously and
is ready for loading the film.
* The QL cover performs a very Im
portant
function
in
film
loading.
This
cover
automatically
opens
and
closes
together
with
the
opening
and closing of the back cover. Do
not touch the QL cover,
2
Insert cartridge.
Raise the rewinding knob sufficiently
After the cartridge has been inserted,
push the knob back to its former position,
and then put the fork into the axis of the
cartridge In case the knob does not fully
return, it can be easily put into proper
position by turning it slightly to the left or
right
3
Pull film to red mark.
4
Engage the film perforations with
the gear.
When
doing
this,
face
the
cartridge
as shown in the picture and hold the film
down with the left hand so that it does not
rise.
23