Canon QL19 - Manual (Page 13)

4. Adjust the film speed setting
lever to a simple exposure
mark by turning the shutter
speed ring.
5. Remove the lens cap. 6 . Wind the film advance lever.
finder for QL 19. In the case of
Canonet QL 17, the aperture stop
on the right end starts from 1.7.
(1) Needle indicates lens aperture:
Gives correct exposure.
(2) Needle inside the arrow mark:
Turn the shutter ring in the direction
of the arrow and take the picture.
(3) Although the ring is turned, the needle
will not indicate the aperture:
Indicating no picture can be taken. In
other words, functioning of EE photo­
graphy is not possible.