Preparation for flash photography, Set the focus accurately, Obtain the aperture stop and set it to the index – Canon EE28 User Manual

Page 30: Press the shutter release button

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1. Preparation for Flash Photography

Attach the flash unit onto the accessory

shoe of the camera and plug the cord
into the flash socket on the camera.

2. Set the Focus Accurately

Focus

and

obtain

the

shooting

distance.

Refer to the distance table on the back

cover of the camera. Accurate focusing is
especially necessary in the case of flash

photography.

3. Obtain the Aperture Stop and Set it

to the Index.

After obtaining the aperture stop, accord

ing to the following calculation, turn the
aperture ring and set the aperture stop to

the index.

„ Guide Number

Aperture Stop =---------- Distance------

4. Press the Shutter Release Button.

Press the shutter release button after check
ing the field-of-view through the viewfinder

The guide number is indicated on the

box containing the flash bulb.

It is convenient to use Flash Unit J-3

because it has an exposure calculating

plate