Check that the frame counter shows “0, Open the back cover, To remove the film before you reach the end – Canon ZOOM76 User Manual

Page 21: B-23

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

The film rewinds automatically when it reaches the

end. The frame counter counts down as the film

rewinds and the frame counter shows “0” when the film
is fully rewound.

[7] Removing the Film

Check that the frame

counter shows “0”.

Open the back cover.
• Push the lever down and

remove the film.

To remove the film before you reach the end

• Press the Qu button on the

bottom of the camera

• Hold the button down until the

film starts to rewind.

■ Always check that the frame counter on the LCD

panel has returned to “0" before you open the back
cover. If the counter is not at “0", use the button push

projection on the camera strap (-> 11) to push the

Qu button

• If you shoot more than the stipulated number of

exposures on a roll of film, the final shot may be lost
during developing and processing, or the date and
time may not be imprinted on the final shot,

B-23