H checking the battery power 0 – Canon ZOOM76 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Check that the
|fj
icon appears on the LCD panel
when you switch the camera on.
[| (on) The battery is fully charged.
Q (on) Prepare new battery.
Q (blinking) Fit the new battery. (-» 13)
A new battery will generally provide enough
charge to shoot approx. 17 rolls of 24-exposure
film (based on Canon’s Standard Test Method at
normal temperatures and with 50% flash use) At low
temperatures (-10°C), the battery life is approximately
half of the normal figure.
•
H Checking the Battery Power
0
• If you are travelling or plan to take a lot of pictures,
take a supply of spare batteries. The correct batteries
may be difficult to obtain at your destination.
■ When you take consecutive shots using the flash, the
battery power may drop off temporarily and prevent
the LCD panel from displaying information correctly. If
this occurs, switch the camera off and wait a few
minutes before switching it back on again.
11-17