Canon 514XL-S - Manual (Page 36)

IQFilm Loading
*'^Pull out the film compartment opening knob in
the direction of the arrow and the side cover slips
downward. Hold the film cartridge with the label
facing towards you and insert the aperture part first
as the chart in the film compartment indicates, then
press the cartridge in so it rests flat. Take care not
to release the shutter release lever when inserting
the sound cartridge because it can scratch the film.
The silent cartridge has to be loaded above the
recording head part. The film speed is also set
automatically. When the main switch is at the "RL"
position, sound cartridge can't be inserted or
removed.
* Be sure to set the main switch to “OFF" when
you change films.
* Sound monitor is not possible when the sound
cartridge is not inserted in the film compart­
ment. In this case, if you press the sound
coupling switch in the film compartment,
sound monitor is possible.
* Checking Film Advance
While looking through the viewfinder, press the
shutter release lever. If the film transport indicator
moves up and down, it is correct. If it doesn't,
take out the cartridge and turn the spindle of the