Canon VI-T User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ATTACHING AND DETACHING
THE CANON-METER 2
First pull out the combination dial on the meter and
bring the mounting leg to the click stop position shown
in Figure 2. Then push accessory shoe into the accessory
clip on the camera.
Align the white line on the side of the combination dial
with the white line on the side of the shutter dial, then
press down the combination dial so that the coupling
cogs at the bottom mesh into the shutter dial cogwheel.
Make sure that these white lines meet exactly. (See
Figure 3).
To detach the meter from the camera, pull out the
combination dial. Remove the meter gently. Be sure
that no pressure is exerted on the light cell in the light
window.
i
2 2