Canon VI-T User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Lift up the Rewind Crank (13).
Put the film cartridge in the recess directly beneath the Rewind Crank.
Depress the Film Rewind Crank (13) again to lock the film cartridge in place.
With your thumb on the knurled lower end of the Take-up Spool (31),
turn the spool clockwise half a turn until the film is taut. (Be sure the index
line of the Film Rewind Ring (8) points to the “A” position.)
The camera back will lock shut automatically when you close it. Turn
the Magazine Opening Key (27) clockwise to “ close.” Next, wind film one
turn and press the Shutter Release Button (9). By doing this you will have
cleared the two frames already exposed to light while you were loading.
The red dot on the Film Transport Indicator (19) makes one complete
turn each time you advance the film one frame. You will know you have
loaded correctly if the indicator line on the Crank Shaft turns counter-clock
wise each time you cock the shutter mechanism.
1 7