Loading the battery and checking the battery level, Loading the battery, Open the battery cover – Canon Sure Shot 115U User Manual
Page 5: Load a new battery, Close the battery cover, Checking the battery level
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Loading the Battery and Checking the Battery Level
■ Loading the Battery
Applicable Battery: One lithium battery (CR2)
Open the battery cover.
^ Load a new battery.
• Align the + - terminals correctly and
insert the battery - end first.
^The I^J> appears on the LCD panel.
Close the battery cover.
# Push the cover closed until you hear a
clicking sound.
^The date display “................. ” on the LCD
panel blinks. Set the date and time.
1
\
o The camera will not operate if the + - terminals are aligned incorrectly.
■ Checking the Battery Level
Check that («J> appearSjOji the LCD panel when you turn the power on.
Change the battery if
is displayed.
5^ (lit) The battery level OK.
lirZJ (lit) Prepare a new battery.
\ I /
(blinking) Load a new battery.
A new battery will generally provide enough charge to shoot approx.
16 rolls of 24-exposure film (based on Canon’s Standard Test Method at
normal temperature and with 50% flash use). At low temperatures (-10°C/
14°F), the battery life is approximately one third of the normal figure.
When you take consecutive shots using the flash, the battery level may
drop off temporarily and prevent the LCD panel from displaying
information correctly.