Viewfinder dial & selector – Canon V User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Adjustment of the Viewfinder Dial (15) is made

by turning the Viewfinder Selector (16).

Position “35” shows you the view which any

Canon 35mm lens will record.

Position “50” gives you what any Canon 50mm

lens will record.

You can focus the Rangefinder at any of the three

positions.

VIEWFINDER DIAL & SELECTOR

For long focal length lenses (i.e. greater than

50mm) or when a larger image is desired for focus

ing, set the selector at “RF”. For lenses other than

35mm and 50mm an accessory Viewfinder is neces

sary to give you correct composition. Alternatively,

a Canon Zoom Finder or Erect Image Finder may
be used. In all cases, the Automatic Parallax Adjust
ment Pin (27) built into the Accessory Clip (22)

will elevate or depress the viewer to correspond to

the focus of your lens from 3.5 feet to infinity.