Film loading and projection – Canon P 400 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Film Loading and Projection
■j Turn the switch knob to the “FWD. & REW.” position.
O Insert the tip of the film into the film inserting slot
^ in the direction of the arrow shown on the film loading
guide while pressing down on the guide.
Q Keep pressing down on the film loading guide until
” the leader part of the film has completely passed
through the pressure plate (approx. 12 cm, 5 inches).
■| he take-up reel takes up the film automatically. Winding
the film around the take-up reel is not necessary if the
tip of film is curled inwards.
4
When the film has been properly taken up, turn the
switch knob to "LAMP".
5
Make the fine adjustments for the focusing. The size
of the projected image can be freely changed by turn
ing the zoom lens barrel.
6
When the picture is cut off by the frame line, make
adjustments by turning the framing knob.