Canon P 400 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

2 Pull up the supply reel

arm all the way.

When projecting Super 8 or Single 8 film, insert the

™ attached reel shaft adapter into the reel shaft match
ing the groove of adapter on the rib. Mount the supply

reel with loaded film onto the reel shaft.

C Bend the clutch lever of the supply reel shaft as shown

in the illustration.

forward

RevN ind

C Lift up the reel holding iever on the take-up reel shaft.

^ Mount the take-up reel onto the reel shaft. In this
case, the reel side which does not have the grooves should

be faced towards you. Then bend the reel holding iever.

Insert the plug into the power supply. The cord is ap

proximately two meters (6.5 feet) long.