Canon EOS 1N RS - Manual (Page 17)

4. Setting and Adjusting Basic Functions
This camera’s shooting mode, AF mode and metering mode are set and
changed as follows;
Set the main switch to “A”.
Press the shooting mode selector
(or AF mode selector or metering
mode selector) and hold it down
while turning the main dial to the left
or right until the desired setting
appears in the LCD panel.
Release the shooting mode selector
(or AF mode selector or metering
mode selector).
To change the film winding mode, use the following procedure:
Set the main switch to “A”.
Open the palm door and press the
film winding mode selector.
Turn the main dial to the left or right
until the desired setting appears in
the LCD panel.
The setting is completed when the
shutter button is pressed halfway or
six seconds elapse.
Pressing a button and turning a dial are the basic procedures for setting
most camera functions. Some functions require that two buttons be held
down simultaneously while turning the main dial. Detailed instructions are
provided where necessary throughout this instruction book.
17