Operating the main switch – Canon EOS 1N RS User Manual

Page 16

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

3. Operating the Main Switch

The main switch has three settings, as described below;

11 : The power is off and the cam

era does not operate. Set the

main switch to this position

when not using the camera.

Setting the switch to B pre

vents unintentional power drain

which can be caused by objects

pressing against the shutter

button during transport or stor
age.

A ; Set to this position when

preparing and operating the

camera.

■»)) ; This position is the same as the

A position except that a beep

sound is emitted when the sub

ject is focused in One-shot AF

or manual focusing mode.

B ; Turns off the camera and

makes it inoperational.

A ; Turns on the camera and

makes it operational.

RS : Same as “A” except that the

RS (Rapid Shot) mode is

also set. This enables a

continuous shooting speed

of about 10 frames per sec
ond with a shutter release

time lag of 0.006 sec.