Canon A2 - Manual (Page 23)

3. Setting the Shooting Mode (Continuous or
Singie Frame Shooting)
* When using the Canon A-1 or AE-1 PROGRAM with the
power winder, the changeover of continuous or single
frame shooting is performed by the main switch. Set the
main switch at "S” for singie frame shooting or "C" for con­
tinuous shooting.
* When the power winder is mounted on an AL-1, AE-1,
AV-1, or AT-1 camera, continuous photography is possibie
on either the "C” or "S" setting as iong as you press the
shutter button down. For single frame shooting with the
main switch at “C" or "S", press the shutter button down
once, then remove your finger from the button.
* in generai, the fiim will be advanced at a rate of about two
frames p>er second.
* When the main switch is turned to "OFF," the fiim can be
advanced manuaiiy with the fiim advance iever.
* The main switch should be set to “OFF” whenever the
power winder is not in use.
2 0