Canon L2 - Manual (Page 41)

«Si:-'"
Ml.iilt
i
ft. for 18 exposures and 2 ft. for 10
exposures.
To assemble the Magazine, first in.sert
the Center Spool into the Inner Shell,
letting the beginning of the film lie
out from the slot.
Introduce the Inner Shell together
with the Center Spool into the Outer
Shell with both Inner and Outer Shell
Slots superimposed. Turn the Inner
Shell counter-clockwise until it clicks
into locked position.
This procedure must be
done in a dark room with
proper safe light or in com­
plete darkness depending
upon film manufacturer's
instructions.
6. When the film magazine is
properly loaded and positively
locked, draw out the film and
trim it as illustraled.
23