Viewfinder dial & selector – Canon L2 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjustment
of
the
Viewfinder
Dial
(16)
is
made
by
turning the Viewfinder Selector (26).
Position
“35”
shows
you
the
view
which
any
Canon
35mm lens will record.
Position
“50”
gives
you
what
any
Canon
50mm
lens will record.
You
can
focus
the
Rangefinder
at
any
of
the
three
positions.
VIEWFINDER DIAL & SELECTOR
For long focal length lenses (i.e. greater than 50mm)
or when a larger image is desired for focusing, set
the selector at “RF’, For lens other than 3S mm
and 50mm an accessory Viewfinder is necessary to
give you correct composition. Alternatively, a
Canon Zoomfinder, Special Viewfinder V. or Lumi-
field Finder V may be used. In all cases, the
Automatic Paralla« Attjustmcnt Pin (19) built into
the Accessory Clip (18) will elevate or depress the
viewer to correspond to focus of your lens from 3.5
feet to infinity.
13