Canon A35 User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Film Winding

After inserting the film and closing the back cover,
wind the film advance lever continuously until it
stops moving. When it stops moving, the frame

counter will indicate 1, which means that the first

frame is in position.

• When the film is wound correctly, the red lines
of film advance indicator on the film rewind crank

shaft will rotate at the same time of film winding.

If the red lines do not move, take the film out of

the camera and load it again correctly.