Canon A35 User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

Battery Check

Look into the viewfinder while pressing the battery

check button. If the meter needle points within
the battery check zone, the voltage is sufficient. If
the needle points below the check zone, voltage is

not sufficient and the mercury battery must be

replaced. Be sure to replace two batteries of the

same brand at the same time.

• Press the battery check button firmly. The meter

needle may drop to the underexposure mark once

and then pop back up to the battery check zone.

• When the batteries are exhausted, the camera

sets an improper exposure or the shutter button is
automatically locked. Make sure to check the

batteries before photographing.