Reloading of film, Unloading of film – Canon DS-8 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Reloading of Film
When one side of the strip has been completely exposed, reverse
and reload the film so as to use the remaining half.
I
When the footage counter indicates "100" for the first half of the
film, stop shooting.
2
Continue to depress the shutter release button until the in
dicator of the footage counter reaches
2 Open the side cover and remove both spools.
4
To use the remaining half of the film, reverse and interchange
the position of the two spools. The supply spool being inserted
into the shaft of the take-up spool and vice versa.
■ Be sure to reverse the spools when reloading. Otherwise, one
side of the film will be exposed twice.
Unloading of Film
After the footage counter reaches "100", continue feeding the film
until and then unload the film. Make certain that the film does
not loosen and put it into the film container. Send the exposed
film to an authorized processing laboratory.