Checking the power level of the batteries, Adjusting eyepiece – Canon DS-8 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ Performance of the alkaline batteries deteriorates in temperatures
of 0°C (32°F) or under. Manganese batteries are recommended in
coid ciimates.
Checking the Power Level of the Batteries
The power level of the batteries can be checked by pressing the
battery check button and checking the position of the needle in the
battery checker window, if the needle reaches the blue zone, the
batteries have sufficient power level. If the needle is in the red zone,
the batteries must be replaced. If the needle is in between the two
zones, the batteries have a power level only for 24 fps or under.
■ Always check the power level of the batteries before shooting.
Adjusting Eyepiece
1
Remove the lens cap, set the eyepiece shutter switch at "0", and
I loosen the eyepiece fixing ring by turning it counter-clockwise.
O Aim the camera in the direction of a bright subject and look into
^ the viewfinder.
3
Turn the eyepiece adjustment ring and adjust it so that the
round edge of the rangefinder and f/stop scale can be clearly
seen. Then tighten the eyepiece fixing ring.