Speedlite 380ex accessories, Multiple-flash accessories – Canon 380EX User Manual

Page 41

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

IV. other Applications

Speedlite 380EX Accessories

© Off-Camera Shoe Cord 2

This cord enables you to use the Speedlite up to 60 cm/1.98ft away from the camera. All of
the camera's automatic functions are left intact

Multiple-Flash Accessories

(2) Off-Camera Shoe Adapter

This adapter has a hot shoe, a Connecting Cord socket, and a tripod socket. Mount a

Speedlite on the hot shoe, connect a Connecting Cord to the Connecting Cord socket, and
mount the adapter on a tripod The Connecting Cord's other end can be connected to a

TTL Hot Shoe Adapter 3 or TTL Distributor.

TTL Distributor

With four Connecting Cord sockets, the TTL Distributor relays exposure information from

the TTL Hot Shoe Adapter 3 to up to three Speedlites via Connecting Cords.

TTL Hot Shoe Adapter 3

Equipped with a hot shoe and a Connecting Cord socket, this adapter is mounted on the

camera's hot shoe. A Speedlite is then mounted on the adapter's hot shoe and a

Connecting Cord is connected to the socket By connecting the other end of the
Connecting Cord to an Off-Camera Shoe Adapter or a TTL Distributor, you can connect
more Speedlites to the camera.

Connecting Cord 60 and Connecting Cord 300

Available in two lengths (60 cm and 3 meters), the Connecting Cords are used to wire a

multiple-flash setup

When a multi-flash accessory Is attached to Speedlite 380EX, the TTL auto flash

exposure mode takes effect.