Pilot lamp and test firing, Flash exposure confirmation – Canon 380EX User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

5. Pilot Lamp and Test Firing

^ Set the power switch to I.

The Speedlite starts to recharge. When

recharging is completed, the pilot lamp
lights.

O After the pilot lamp lights, press it
^ to test fire the flash. (The pilot lamp

is also a test firing button.)

The flash cannot be test fired while the exposure setting Is displayed during the

L|1 halfway pressing of the shutter button and the four seconds after the shutter

button is released.

6. Flash Exposure Confirmation

The flash confirmation lamp lights for
2 sec. after the flash fires if the correct
flash exposure has been obtained. If

the flash confirmation lamp does not

light after the flash fires, the picture
may have been underexposed. Move

closer to the subject and try again.