Troubleshooting, Problem cause solution – Craftsman 315.220380 User Manual

Page 59

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TROUBLESHOOTING

PROBLEM

CAUSE

SOLUTION

Saw blade tends to push wood to
one side when cross cutting.

1. Blade is heeling.

2. Column tube is loose in coiumn

support.

3. Arm is loose or misaligned.

4. Fence/tabtes are not straight.

5. Blade or teeth are bent or dull.

1. See

Squaring the Blade to the

Fence

Adjustments

section.

2. See

Adjusting the Column

Tube

in Assemb/y section.

3. See

Setting the Arm Lock

Wheel

in the

Assembly

section.

4. Check with square; sand or

replace.

5. Sharpen or replace the blade.

See the removal procedure in

Assembly

section.

5»

CRfIFTSHItN' RADIAL SAW 315.220380