O1 f – Craftsman 917.293310 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
p
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
\ /
o
1 f
CULTIVATING
Cultivating is destroying the weeds
between rows to prevent them from rob
bing nourishment and moisture from the
plants. At the same time, breaking up the
upper layer of soil crust will help retain
moisture in the soil. Best digging depth is
V to 3" (2.5-7.S cm). Lower the outer side
shields to protect smalt plants from being
buried.
• Cultivate up and down the rows at a
speed which will allow tines to uproot
weeds and leave the ground in rough
condition, promoting no further growth of
weeds and grass.
TINE SHEAR PINS
The tine assemblies on your tiller are
secured to the tine shaft with shear pins
(See
TINE REPLACEMENr
in the
Senrice and Adjustments section of this
manual).
If the tiller is unusually overloaded or
jammed, the shear pins are designed to
break before internal damage occurs to
the transmission.
• If shear pin(s) break, replace only with
those shown in the Repair Parts sectior
of this manual.
12