Craftsman 987.889000 - Manual (Page 4)

SAFETY RULES
6. Keep mower free of grass, leaves or other debris
build-up. Clean up oil or fuel spillage. Allow mower to
cool before storing.
7. After striking an object, stop the engine and discon­
nect the spark plug wire. Inspect the mower and re­
pair, if necessary, before restarting.
8. Never attempt to make mower cutting height adjust­
ments whiie the engine is running.
9. Grass catcher components are subject to wear, dam­
age and deterioration, which could expose moving
parts or allow objects to be thrown. Frequently check
components and replace with Sears recommended
parts, when necessary.
10. Mower blades are sharp and can cut. Wrap the blade
or wear gloves, and use extra caution when servicing
them.
PI
11. Do not change the engine governor setting or over­
speed the engine.
12. Do not touch engine parts which may be hot from
operation. Allow parts to cool completely before in­
specting, cleaning or repairing the mower.
13. To access the underside of the mower, tip the mower
rearward. Do not tip the mower forward or on either
of its sides, uniess specifically advised to do so in
this manuai.
14. Maintain or replace safety and instructional decals.
Refer to the Repair Parts Section for replacement
decal information.