Casio PX-400R - Manual (Page 33)

E-31
Using a Memory Card
419A-E-033A
Loading a File from a Memory
Use the procedure below to load data from a memory card into the
digital piano memory.
IMPORTANT!
• Before you can use a SmartMedia card with this digital piano,
you need to perform the procedure below to format it. After
formatting the card, transfer SMF data from your computer to
the card.
• Formatting a SmartMedia card with this digital piano
automatically creates a folder named “CASIO_MD” on the
card. When transferring SMF data from your computer to the
card for use by the digital piano, be sure to store it in the
“CASIO_MD” folder.
Getting Ready
• Insert the SmartMedia card that contains the data you want to
recall into the digital piano’s card slot.
NOTE
• Depending on the type and the amount of data involved, a
memory card data save or load operation can take anywhere
from a few minutes to more than 10 minutes to complete.
The message “Please Wait” will remain on the display to
indicate that a data save or load operation is being performed.
IMPORTANT!
• Never try to perform any operation while “Please Wait” is
displayed. Performing any operation can cause digital piano’s
built in memory data or the memory card data to be deleted, or
damage data and make it impossible to read.
To load file data from a memory card
1 Press the CARD FUNCTION button.
• This causes the indicator lamp above the button to light.
2 Use the dial to display the “Load” screen.
3 Press the [ ̈] cursor button to advance to the file type
selection screen.
4 Use the dial to select the type of file you want to load.
5 Press the [ ̈] cursor button to display the file name
selection screen.
6 Use the dial to select the name of the file you want to
load.
7 Press the [ ̈] cursor button to advance to the next
screen.
8 Use the dial to select the destination of the file you are
loading.
9 After selecting the destination, press the EXECUTE
button.
• This will display a confirmation message asking whether
you really want to load the data.
10 Press the YES button to load the data.
• The message “Please Wait” will remain on the display
while the load operation is being performed. Never try to
perform any other operation on the digital piano while
the card is being accessed. The screen in step 2 will
reappear after the load operation is complete.
• If you do not want to continue with the load operation, press
the NO button. This will return to the screen in step 8.
11 After you are finished loading the data, press the CARD
FUNCTION button so its indicator lamp goes out.
To load this type of file:
Music Library playback tune
Song Memory data
Registration memory setup
Select this destination:
User song number/name
Song number
(Song 1 or Song 2)
Bank number
PX400R_e_29-37.p65 04.8.24, 4:34 PM 31