Casio PX-400R - Manual (Page 27)

E-25
Deleting a Specific Part/Track
You can use the following procedure to delete a specific part/track
from a song recording or free recording.
Getting Ready
• Press the SONG/USER button or PIANO button.
• Press the RHYTHM button.
1 Press the SONG MEMORY button to enter record
standby.
2 Use the TRACK button to select the part/track you want
to delete.
3 Hold down the SONG MEMORY button until a
confirmation message appears on the display.
• To cancel the delete operation, press the NO button.
4 Press the YES button to delete the data.
• This causes the digital piano to return to Song Memory
playback standby.
NOTE
• Pressing the SONG MEMORY button while the part/track
delete screen is on the display returns to record standby.
Song Memory contents are retained even when you turn
off digital piano power (page E-4, A-7).
Recording Your Keyboard Play
Overdubbing a Free Recording
You can use the following procedure to record a melody in Track
2 that combines something else that you previously recorded in
Track 1.
Getting Ready
• Press the RHYTHM button to enter the rhythm mode.
• Press the SONG MEMORY button to enter record standby.
1 Use TRACK button to select Track 2.
2 Configure the following setting as required.
• Tone number
* Use a slower tempo if you feel you might have trouble
playing properly at a faster tempo (page E-17).
3 Press the START/STOP button.
• This starts playback from Track 1 and recording to Track 2.
4 Play the melody notes you want as you listen to the
playback from Track 1.
5 To stop recording, press the START/STOP button again.
* If you make a mistake, you need to go back and
re-record from step 1.
* If you want to immediately hear what you recorded,
press the START/STOP button again.
NOTE
• Track 2 is a melody-only track, which means that chord
accompaniment cannot be recorded there. Because of this,
the entire range of the keyboard becomes a melody keyboard
when recording the Track 2, regardless of the current MODE
button setting.
• If you want to record without playback from a recorded track,
enter playback standby, deselect the playback track, and then
enter record standby. Note, however, that you cannot turn
off rhythm and Auto Accompaniment.
Free Recording Track 2 Data
In addition to notes played on the keyboard, the following data is
also recorded to Track 2.
• Tone number
• Pedal operations
• PITCH BEND wheel operations
Flashing
419A-E-027A
PX400R_e_17-28.p65 04.8.24, 4:34 PM 25