Craftsman 917.293301 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Engine Pulley
Stud “C”
Belt Guide *'A"
Cable Clip Screw
Drive Control Cable
Transmission Pulley
TINE REPLACEMENT
A
ca
UTION: Tines are sharp. Wear
gloves or other protection when handling
fries.
k badly worn tine causes your tiller to work
larder and dig more shallow. Most impor
ant, worn tines cannot chop and shred
>rganic matter as effectively nor bury it as
leeply as good tines. A tine this worn
leeds to be replaced.
Jew Tine
oreTension
To maintain the superb tilling perfor
mance of this machine the tines should
be checked for sharpness, wear, and
bending, particularly the tines which are
next to the transmission. If the gap
between the tines exceeds 3-1/2 inches
they should be replaced or straightened
as necessary.
New tines should be assembled. Sharp
ened tine edges will rotate rearward
from above.