HP MediaSmart HP SL4282N User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MediaSmart Television Setup
Your installation may take 30 minutes.
]
NOTE:
For system requirements information, refer to the
User Guide
on the
installation CD.
Before you begin, moke sure you hove the following:
HDTV Setup:
■ A high-definition TV source (such os a coble box or off-air antenna)
■ A component (YPbPr) cable or HDMI cable for receiving high definition
content from a set-top box
MediaSmart Networking Setup:
■ A computer with Windows Vista® or Windows XP® with Service Pack 2
installed
■ An active broadband network connection [such as a cable modem or DSL)
■ A wired or wireless home network router
■ If you are using wireless, you need the network name (SSID) and security
password (for example, WEP key or WPA passphrase):
o
SSID_________________________________________________________________________________
o Key
IMPORTANT:
Make sure your TV is set up and your home network is
working
before
installing the MediaSmart software on your computer.
Table of Contents
What's in the box.................................................................................................................................2
Other cables / items you may use (purchase separately).............................................................. 3
Connect video sources (optional)...........................................................................................5, 6, 7
Connect to home network (LAN)...................................................................................................... 8
Power connection / Remote control batteries............................................................................... 9