Power on / initial tv setup – HP MediaSmart HP SL4282N User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Power on / Initial TV setup
For advanced connections, refer to the user documentation.
Apply power to all components and then to the TV.
For more assistance, refer to the
User Guide
or go to:
BGCDB
sso®
['..1 [».11*~]
OG3CD
soe
w
Initial TV setup
1
A
Power light
B
Remote control sensor
C
Power button
The Power light shows whether the TV is on or off.
Power light
TV status
Blue
TV is off but plugged into
AC power source.
Amber
TV is powering on
(light turns off after about 30 seconds).
Off
TV is on, or AC power cord
is disconnected.
Flashing amber or blue
Startup diagnostics are in progress, or
an error occurred.
When you turn on the TV for the first time, a Setup Wizard guides you through the following tasks:
■
Setting the onscreen display language: English, French, or Spanish
■
Setting the Clock mode (if manual, enter the time zone, date, and time)
■
Selecting a signal source: Cable or Antenna
■
Searching the TV signal source (antenna or cable) and memorizing the available TV channels