If the recordings overlap, Recording using the smartfile function (continued), Start recording – Sony SLV-M91HF User Manual
Page 48: Information will be erased, Program 1 program 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Recording using the SmartFile function (continued)
4
Press SP/EP to select the tape speed, SP or EP.
The BLANK TIME changes according to the
selected tape speed. Select a tape speed that
matches the length of the program you want
to record.
Push the cursor stick (OK).
The VCR goes to the beginning of the Blank
Time space and stops.
<
1
BtAhKilME
fp 0
h
36
u
K» «:90
wcn
16
8/16
O
h
30
u
i p
H_____ «:00w< PM12
_______ 8/13
O
h
SO
u
m
№ 2 :30
m
ch
B
8/10
O
h
30
m
f
*
s
TART^^
6
Start recording.
If the recordings overlap
If a newly recorded program overlaps a stored program, the data appearing
in the SMARTFILE list is as follows.
• If the second program overwrites the first program for 15 minutes or more in EP
■ mode or 5 minutes or mor e in SP mode from where the first program starts, the first
program data is erased.
. 15 minutes or more in EP mode,
5 minutes or more in SP mode
Program 1
Program 2 c:
L
Information will be erased
If the remaining length of the first program is 15 minutes or less in EP mode or
5 minutes or less in SP mode after being overwritten by the second program, the
first program data is erased.
Program 1
Program 2
I
15 minutes or less in EP mode,
5 minutes or less in SP mode
=>
Information will be erased
48
SmartFile Function