Sony SLV-M91HF - Manual (Page 17)

• 1 /( 1 )
Press 1/(1) to turn off the VCR.
The 0 indicator appears in the display window and the VCR stands
by for recording. When using a cable box, leave it on.
To stop recording
To stop the VCR while recording, press ■ STOP.
Daily/weekly recording
In step 3 above, move the cursor sticJc ♦ to select the recording pattern. Eacdi
time you move the cursor stick ♦/ the indication changes as shown below.
Move the cursor stick ♦ to change the indication in reverse order.
the current date -► SUN-SAT -► MON-SAT -► MON-FRI -► EVERY SAT -♦...........
-► EVERY MON -» EVERY SUN -♦ 1 month later -► (date counts down) -♦
the current date
To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press l/(!). The ©
indicator disappears from the display window and the VCR switches on.
Remember to press
l/(!) to reset the VCR to the timer recording standby
mode after using the VCR.
You can also do the following tasks while the VCR is recording;
• Reset the counter.
• Display tape information on the TV screen.
• Check the timer settings,
• Watch another TV program.
To lock the VCR after setting the timer (Child Lock)
While the VCR turns on, hold down l/C!) POWER on the VCR until the o-n
indicator appears in the display window. The VCR turns off and the o-"
indicator remains lit. The VCR will not work except for timer recording.
To unlock the VCR, hold down l/(!) POWER on the VCR until the o-"
indicator disappears from the display window. The VCR is urUocked and
turns on.
To stop timer recording while the VCR is locked, press ■ STOP. The
recording stops and the VCR is unlocked.
continued
Basic Operations