Troubleshooting – Sony WEGA KV-32FS12 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Other Information
Troubleshooting
If you are having a problem with your TV, try the suggestions below. If
the problem persists, contact your nearest Sony dealer.
No picture, no
□
Make sure the power cord is plugged in.
sound
□
If red light is flashing on the front of your TV for more
than a few minutes, disconnect and reconnect the
power cord to restore the TV. If the problem continues,
call your local service center.
□
Check the TV/VIDEO settings: when watching TV, set
to TV; when watching video equipment, set to VIDEO
(page 14).
□
Make sure the batteries have been inserted correctly
into the remote control (page
2
).
□
Try another channel, it could be station trouble.
Poor or no
□
Adjust Picture in the Video menu (page 22).
picture, good
□
Adjust Brightness in the Video menu (page 22).
sound
□
Check the antenna and/or cable connections (page 3).
Good picture.
□
Press so that MUTING disappears from the
no sound
screen (page 14).
□
Check your Audio settings. Your TV may be set to
Auto-SAP (page 24).
No color
□
Adjust Color in the Video menu (page 22).
No signal
□
Check the Cable setting in the Channel Setup menu
(page 25).
□
Check the antenna and/or cable connections (page 3).
□
Make sure the channel selected is currently
broadcasting.
Dotted lines or
□
Adjust the antenna.
stripes
□
Move the TV away from other electronic equipment.
Some electronic equipment can create electrical noise,
which can interfere with TV reception.
Double images
or ghosts
□
Check your outdoor antenna or call your cable service.
39